Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays     

Boonchai Ukritchon  Suraparb Keawsawasvong 《国际地质力学数值与分析法杂志》2020,44(5):596-632

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.  相似文献   

Access routes to high mountain huts facing climate-induced environmental changes and adaptive strategies in the Western Alps since the 1990s     

Jacques Mourey  Ludovic Ravanel  Christophe Lambiel  Joël Strecker  Mattia Piccardi 《Norsk geografisk tidsskrift. Norwegian journal of geography》2019,73(4):215-228

ABSTRACT

In the European Alps, high mountain environments are subject to major impacts resulting from climate change, which strongly affect human activities such as mountaineering. The purpose of the study was to examine changes in access routes to 30 high mountain huts in the Western Alps since the 1990s. Data were derived from the use of two different methods, geo-historical studies and a questionnaire, and were used to identify both the climate-related processes affecting the climbing routes and the strategies implemented by public entities, Alpine clubs, guide companies, and hut keepers to maintain acceptable safety and technical conditions. The case studies revealed issues affecting three access routes and the results from the questionnaire showed that the main processes affecting access routes were loss of ice thickness and retreat from the front of the glaciated areas. Commonly, in situ equipment was installed to facilitate access for mountaineers and/or a part of a route was relocated to a safer area. The authors conclude that in most cases, the measures were effective but they were limited by financial, ethical and legal issues, especially in protected or classified areas that could jeopardise their durability and effectiveness.  相似文献   

新型珊瑚海水混凝土力学性能试验研究   总被引：2，自引：1，他引：1  

吴彰钰  余红发  麻海燕  章艳  梅其泉  达波  谭永山  华实 《海洋工程》2018,36(3):59-68

为了解决全珊瑚海水混凝土(coral aggregate seawater concrete,简称CASC)的脆性问题,采用碱式硫酸镁水泥(basic magnesium sulfate cement,简称BMSC)为胶凝材料和剑麻纤维为增韧材料制备了一种新型全珊瑚海水混凝土(NCASC),系统测定了基本力学性能,并与普通硅酸盐水泥制备的CASC、碱式硫酸镁水泥砂石混凝土(basic magnesium sulfate cement concrete,简称BMSCC)、普通砂石混凝土(ordinary portland cement concrete,简称OPC)以及普通轻骨料混凝土(lightweight aggregate concrete,简称LAC)的力学性能进行对比。结果表明:立方体抗压强度(f_(cu),m)在15~35 MPa范围内的NCASC的轴心抗压强度(f_c,m)、劈裂抗拉强度(f_(sp),m)与f_(cu),m之间具有较显著的线性关系;对于f_(cu),m为15~35 MPa的混凝土,相同强度NCASC的f_c,m高于OPC、LAC及BMSCC,其f_c,m与f_(cu),m比值最大,大致在0.85~0.96之间,NCASC的f_(sp),m比OPC和LAC高,但比BMSCC低,且随着强度的提高,OPC与NCASC的f_(sp),m间的差距在增大,而LAC和BMSCC与NCASC的f_(sp),m间的差距在缩小;在强度等级C15~C55的范围中,NCASC和CASC的f_(sp),m、f_c,m与f_(cu),m之间的关系基本可以采用相同的线性回归方程来描述,利用这两个回归线性方程得到对应于标准强度等级的CASC和NCASC的f_(sp),m和f_c,m数据,为CASC力学性能研究与结构设计提供参考依据。  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献   

Effect of sand on the vacuum consolidation of dredged slurry     

Jun Wang  Yuanqiang Cai  Xueyu Geng  Fengqi Xu 《Marine Georesources & Geotechnology》2018,36(2):238-244

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   

围海造陆条件下排海高温浓盐水对渤海湾温盐场分布影响模拟及预测     

白玉川  温志超  徐海珏 《海洋学报》2019,41(3):62-75

自2000年以来围绕渤海湾的围海工程剧增，致使工程区附近潮流场发生变化，进而影响排海高温浓盐水的时空分布特征。本文通过建立2000年和2015年两种不同岸线、地形条件下的三维数学模型对渤海湾沿岸3个电厂高温浓盐水表层排海问题进行模拟，研究结果表明，渤海湾的潮流场和高温浓盐水输移扩散特征在近十几年发生了较大变化:工程后，渤海湾平均盐度增大0.203，平均温度升高了0.105℃，同时曹妃甸附近海域浓盐水输移扩散速度明显增加。增大排放口流量至12.7 m3/s，湾内最高温度为26.46℃，较2015年最高温度增加了2.72℃。本文模型可准确模拟及预测排海废水盐度、温度分布特征，为合理布置水电联产设备排放口的位置提供理论基础。  相似文献   

Effect of nano-MgO on mechanical performance of cement stabilized silty clay     

Kai Yao  Dongliang An  Na Li  Chen Zhang  Aizhao Zhou 《Marine Georesources & Geotechnology》2020,38(2):250-255

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.  相似文献   

脚靴式海上升压站灌浆连接段强度分析研究   总被引：1，自引：1，他引：0  

王永发  孙震洲  汤群益  陈杰峰 《海洋工程》2020,38(5):107-115

与国内已建成的海上升压站相比，脚靴式海上升压站导管架对桩和套筒间的灌浆连接强度要求更高，完全套用单桩风电结构的分析方法会使结构设计不准确。由于桩和套筒之间设置有剪力键，当特殊情况时还需增加灌浆连接增强钢筋，在地震及撞船作用下容易导致灌浆接触界面分离等破坏，当前尚未有针对此类情况系统的灌浆连接强度校核方法。以某脚靴式海上升压站为例，分析其在在位、撞船、地震、疲劳等多个主控工况下灌浆连接、剪力键及增强钢筋的强度及稳定性，结果表明该海上升压站灌浆连接段满足设计要求，并研究了各参数对灌浆连接段强度的敏感程度，为今后脚靴式海上升压站各主控工况下的灌浆连接段强度分析、优化设计提供参考与借鉴。  相似文献   

轴压作用下双金属复合管组合作用与承载力分析     

朱振兴  杨璐  王法承  方成 《海洋工程》2019,37(4):98-106

为探究轴压作用下双金属复合海底管道的组合作用与承载性能,对双金属复合海底管道进行了试验研究和理论分析。开展了不锈钢衬管材料性能试验,对比了国际主流不锈钢本构关系模型和试验结果。利用ABAQUS建立了精细化的双金属复合管道轴压试验有限元模型,系统研究了关键参数如复合工艺产生的环向复合应力、钢管初始缺陷幅值等对双金属复合管在轴压作用下力学性能的影响规律。通过对比已有轴压双金属复合管道试验结果,验证有限元模型。基于验证的有限元模型,对轴压作用下双金属复合管道的组合作用以及径厚比和材料强度对承载力的影响进行了分析。结果表明双金属复合管道的轴压极限承载力主要取决于基管的截面屈服荷载,并随着管径和材料强度的提高而增大。并依据分析结果对双金属复合海底管道的设计提出建议。  相似文献   

Adaptive analysis of infinite beams dynamics problems using the periodic configuration update method in the time domain          下载免费PDF全文

Reda Mezeh  Marwan Sadek  Fadi Hage Chehade  Isam Shahrour 《国际地质力学数值与分析法杂志》2018,42(4):618-635

This paper proposes a new approach for the assessment of the dynamic response of continuously supported infinite beams under high‐speed moving loads. A change in the representation of equations of motion in the dynamics of discrete structures is proposed to obtain an improved accuracy of the numerical integration in the time domain. The proposed numerical method called the “periodic configuration update” or “PCU method” is applied to solve the problem of a vertical moving harmonic load on an infinite classical Euler‐Bernoulli beam resting on a continuous viscoelastic foundation. This study shows the superiority of the proposed method in comparison with other methods presented in the literature that suffer from the material time derivative, i.e., convective terms, that arises from the Galilean transformation. To confront this numerical problem, the PCU method retains the principle of the spatial follow of loads while zeroing the relative velocity with the traversed beam via a step‐by‐step adaptive integration of the equation of structural dynamics. The dynamic load is modeled with high theoretical velocities that can reach the critical velocity of the studied beam with different angular frequencies belonging to moderate frequency range. A parametric study is carried out to analyze the influence of key parameters on the convergence. The obtained results show a high efficiency of the PCU method for solving these types of problems relative to the dynamics of high speed trains/tracks.  相似文献